Front Mounted Attachments
• Snow Blowers • Rotary Cutters • Posthole
Diggers
• Post Pounders • Offset Blades • Street
Sweepers & Brooms
• Chippers • Stump Grinders • Finish
Mowers (single unit or multi-gang mowers)
• Log Splitters • Flail Choppers (cuts brush
up to 4 inches thick)
• Trenchers • Dozer Blades • Boom Sprayers
• Tree Spades
• Cement Mixers • Soil Probes • Seed
& Fertilizer Spreaders • Bale Spears
• Roll Over Fork Attachment
Fork Lift Frame
3 Section Frame
· Mast Carriage- ¾ inch thick steel bracket
mounted to the mid-frame with 5 hardened ¾ x 2
½ bolts on each side
· Mid-Frame- ½ inch thick steel frame mounted
to the axle with roll bar mount extending to the front
of the engine. Mounted with 8 hardened bolts on each side.
· Weight Bracket- ½ inch thick steel frame
mounted to rear of the unit with 6 hardened bolts on each
side.
Steering Axle
· Hydrostatic – with dedicated
pump
· 4.9 Gallon per min capacity
· 61 Degree lock angle with 10 degree chamber
· Extremely maneuverable in tight areas with a
finger tip control
Fork Lift Mast Specifications
· Maximum Lift Height – 10 ft.
· Maximum Rate of Lift – 12.65 seconds
· Maximum Rate of Lower – 10 seconds with
Velocity Fuse
· Lift Capacity – 2800 pounds
· Degree of Tilt Forward – 12 degrees
· Degree of Tilt Backward – 10 degrees
· Four Roller Mast – Four 4 inch outside
diameter sealed bearings mounted on 1 3/8 inch solid stub
shaft
· Mast Chain – Continuous link leaf chain,
8,000 pound rating
· Fork Carriage – Four 4 inch outside diameter
sealed bearings with integrated side shift, 4 inch travel
each side, 8 inch total travel
· Forks – Solid 42 inch long class II forks,
adjustable width from 8 inches to 48 inches outside diameter
Press Release
· 33 Rental Publications
· 121 Fruit & Vegetable Publications
· 154 Total Possible Publications
